Une bonne visibilité est une garantie importante de la conduite de nos essuies - glace, car les essuies - glace sont importantes non seulement dans le temps comme la pluie et la neige, mais aussi dans n 'importe quel endroit sale, comme le pare - brise ou le ruban adhésif.
Cependant, nous allons découvrir que les essuie - glace de la voiture ne fonctionnent pas bien pour assurer une bonne visibilité, pourquoi?Nous pourrions trouver les raisons suivantes:
1. The dirt on the windshield is too thick
2. Car wiper blade rubber strip aging
3. The car wiper blade angle is getting out of shape
4. ...
Comment entretenir ta voiture??
1. Clean your windshield regularly, there will be adhesion on the windshield surface, such as thick dust, bird droppings and tree leaf etc. Because these attachments could damage the rubber refill of car wiper blades, so you need to clean with a soft towel; For the attachment on rubber refill, please clean it in time too; When you clean the rubber and dirt windshield, you could use professional windshield cleaning fluid instead of tap water, as professional cleaning fluid has better oil removal ability and volatility than the tap water;
2. Be sure to use the car wiper blade with water on the glass surface if clean the dirt windshield, remember to avoid dry scrapping. The car wiper blade refill is made of rubber material, if dry scraping will damage the rubber;
3. After the rainy day, the car should be washed as soon as possible. The acidic components in the rainwater tend to cause the rubber strip to age. When the windshield is frozen and snow-covered in winter, the wiper blade cannot be used to clean them, otherwise the rubber strip is easily damaged;
4. The wiper blade should better be stand up when the parking is stopped, so that the rubber strip and the glass surface are not in contact with each other, especially when the car is not used for a long time, the car wiper blade should be erected, and the gap between the rubber strip and the glass surface will be lost when the car is parked. It is full of dust and impurities. When using the car wiper blades, these dusts and impurities will rub against the surface of the strip or windshield, which will affect the wiping effect. When the car is parked, the engine will heat up from the hood to the windshield. Evaporation, if the car wiper blade is not raised, the car wiper blade will accelerate aging.
5. Regular inspection: The method of checking the car wiper blade is very simple. Spray some cleaning liquid, then start the car wiper blade system, pay attention to whether its movement is smooth, and listen to whether there is a big “scratch”sound, if any, it means car wiper blades excessive pressure on the windshield, you must make appropriate adjustments. When the wiper blade is not tightly attached, it should be adjusted to a professional repair shop as soon as possible to prevent potential safety hazards.
6. Avoid chemical attack such as glass water and other chemicals will erode the strip and accelerate the aging of the strip. Therefore, the front windshield should be scrubbed without chemicals. Even if it is used, be careful not to let the chemical contact the strip.
7. Timely maintain the car wiper blade, you should also pay attention to maintaining the car's water spray system: adding neutral, decontaminating, lubricating cleaning agents; poor cleaning fluid will corrode the water spray system, wiper and car finish. Fill the water in time to avoid the water spray motor being unloaded. Keep away from oil stains: Because there is oil on the glass, the water traces easily condense into water droplets after water, and it is easy to appear fine water phenomenon.
La conduite en toute sécurité est très importante pour tous les conducteurs, et les essuies - glace permettent de réduire le nombre d 'accidents de la circulation et d' assurer la sécurité des déplacements.Donc, s' il vous plaît faites attention à l 'entretien des essuies - glace, si vous avez des questions sur vos essuies - glace, contactez - nous;
Alice.
Xiamen Yu Jin Plastic Manufacturing Co.
Add:77, Siming Industrial Zone, Meixi Road, Xiamen,China
Tel:0086-592-7230097 Fax:0086-592-7230029
Mailles: www.yjwipers.com Skype: alicechen7800
Cellphone:+8615259246075 Email:alicechen@xmyujin.com
